The Fibrelight Cradle is a maritime recovery system that can be operated by a single crewmember. The Cradle also
serves as a boarding ladder, scramble net and stretcher.  The Fibrelight Cradle is lighter, more compact and more
versatile than any comparable devices on the market.

The Cradle requires only regular inspections and minimal maintenance, so there is no requirement to pay for annual
servicing.  The Cradle has been primarily designed for use by rescue craft, rigid inflatables, ship lifeboats and marinas, however it is currently in use in many other vessels and industries.

The Fibrelight Cradle enables MOB recovery by one end of the Cradle being secured to the craft and the outboard end being held away from the boat by hand, boat hook or bridle.  The MOB is then guided into the Cradle and once securely in the outboard end of the Cradle is then hauled in rung by rung. Using this parbuckling action the MOB is safely rolled up and over the side of the craft.

KEY FEATURES:
– SOLAS approved
– Lightweight
– Portable
– Compact
– Multiple uses
– No annual servicing required
– 3 years manufacturers warranty

SPECIFICATIONS:
– Width – 1.3m
– Lengths – 2m – 7m
– Weight – 1.6 kg per metre

THE FOLLOWING ADDITIONAL EXTRAS ARE OFFERED:
• Attachment Slings to add length and convert the cradle from 6-point linkage to 2 or 3-point linkage
• Ballast Rungs to offer sinkage in the middle rungs of the cradle
• Extendable Rescue Hook to assist with bringing the MOB towards the cradle
• Loop-Through Bag to protect and safely store a cradle in its position of use

sleep in the sink climb the curtains attack, give me fish.

The Max Fire Hose Inflation Kit has been developed as a simple, cost-effective, high quality method of providing rapid rescue support to conscious casualties.

Compact and robust, the system is deployed in seconds and allows lengths of ordinary, layflat hose to be utilised as floating rescue lines or booms which can be used equally well on water, mud or ice.

Operated safely from the shore, the system features high quality components that will give long and reliable service and the shadow board design of the cases foam insert mean you should never leave an item behind following a rescue.

Inflation pressure is limited to 3.0 bar via a deadman controller that can feature an optional Series 25 KD outlet to make system operation whilst wearing gloves that much easier and more convenient.

The design is simple, robust and versatile. Usually supplied with British instantaneous couplings, versions using Storz connectors are also availableEach kit comprises:

• Compact cylinder regulator
• Hand-held controller with “deadman” cut-off
• Delivery and inflation hoses
• Relief valve to prevent over-inflation
• Inflation coupling throw line attachment point
• Shut-off coupling with optional locking pin to prevent accidental release c/w high-visibility cover.

A choice of storage cases from a compact, budget plasticase to a premium quality, waterproof, IP67 rated case. All fitted with custom cut foam protection to preserve your asset.

The Max Fire Mud Lance Tool is a unique tool for inserting into sand or mud for rescuing trapped casualties with the use of water or air.

The entrapment media is quickly dissolved, freeing the casualty for easy recovery.

Water from Hose Reel

Connect high pressure hose reel to male coupling of lance, operate fire pump, 5 bar at pump gauge is sufficient. Insert lance into media, open valve until water is jetted from bottom of lance dissolving media. Water is recommended for wet media.

Air from BA Cylinder

Connect hose from BA cylinder low pressure regulator to male safety lock connection on lance , insert lance into media , open BA cylinder valve , then operate lance as required . Air is recommended for dry media.

Construction

The Max Fire Mud Lance is of very strong construction, manufactured from heavy duty stainless steel tube.

All parts are easily cleaned.